- Home
- ยป
- Our Products
- »
- Wheel Sensor Paver Finishers
Wheel Sensor Paver Finishers
7.5 Meter Wheel Sensor Paver Finishers
Working Speed | 0 to 30 m/min (Max.) |
Wheel Base | 2.61 m |
Hopper Capacity | 4.25 m3 (151 ft3) |
Operating height | 3.47 m |
Brand/Make | Uniter |
Model/Type | VP-05 Wheeled Paver 7.5 M |
Engine Power | 125 hp |
Screed Size | 2.5m to 7.5m |
Wheels On Rear Axle | Two On Each Side |
Electronic Sensor | MOBA,Germany |
Material Laying Capacity | 300 TPH |
Operator Seat | Double |
Work Applicability | Bituminous Material |
Electrical System | 12 V DC |
Travelling Speed | 0 to 16 km/hr (Max) |
Fuel | 156 L (34.4 gal) |
Engine Oil | 14 L (3.0 gal) |
Hopper Working Width | 3.22 m |
Hopper Closed Width | 2.44 m |
Feed Tunnel Width | 1.268 m |
Dump Height | 0.70 m |
Thrust Roller Height | 0.54 m |
Hydrostatic Paver Finisher Model UWP03 - Road Paver Finisher
Capacity | 150 TPH |
Brand | UNITER |
Usage/Application | Road Construction Work |
Model Name/Number | UWP03 |
Automation Grade | Manual |
Weight | 10400 KG |
Hydraulic Tank | 240 L |
Oil Tank Capacity | 13 L |
Voltage | 12 V DC |
Country of Origin | Made in India |
- Transmission: Hydrostatic
- Engine Power: 74.5 hp @ 2200 rpm
- Laying Capacity: 150 TPH
- Hopper Capacity: 4.25 m3
- Paving Width: 2.5 m to 4.5 m.
- Weight: 10,400 kg.
- Wheels on rear axle: Two wheels
- Conveyor Drive: Hydraulic
- Operator Seat: Double
- Material Suitability
- Option 1: Bituminous material
- Option 2: Bituminous, Wet mix, GSB, DLC, DBM material
Wheel Sensor Paver Finisher
Brand/Make | Uniter |
Weight | 14,100 kg (31,200 lb) approx. |
Model/Type | VP-05 |
Material Laying Capacity | 300 TPH |
Engine Power | 125 hp |
Screed Size | 2.5m to 5.5m |
Wheels On Rear Axle | Two On Each Side |
Electronic Sensor | MOBA,Germany |
Operator Seat | Double |
Work Applicability | Bituminous Material,Bituminous,Wet Mix,GSB,DLC,DBM Material (Dual Purpose) |
Working Speed | 0 to 30 m/min (Max.) |
Travelling Speed | 0 to 16 km/hr (Max) |
Screed width | 2.5 m,Hydraulically extendable up to 4.5 m |
Crown | -1 deg / +4 deg |
Screed Vibration | 0 to 50.00 Hz |
Screed Tamping | Yes,infinitely variable ( 0 to 33.33 Hz ) |
Fuel | 156 L (34.4 gal) |
Hydraulic Oil | 282 L (62.1 gal) |
Cooling System | 6.5 L (1.4 gal) |
We are offering Wheel Sensor Paver Finisher to our client.
Features:
Kirloskar make water-cooled electric start diesel engine, Model 6R 1080 TA1, 125 hp @ 2200 rpm or equivalent.
Engine has sufficient space on all the sides for air draft and cooling of engine.
Engine is easily accessible for daily maintenance like checking engine oil, coolant water level, engine suction filter etc.
Engine starter, alternator can be easily removed for periodic maintenance.
Gauges like engine temperature, oil pressure and ampere meter are on sliding panel and are easily visible from operator’s seat.
Wheel Sensor Paver Finisher
Brand/Make | Uniter Engineering |
Hopper Capacity | 4.25 m3 (151 ft3) |
Material Laying Capacity | 125 TPH |
Engine Power | 76 hp |
Screed Size | 2.5m to 4.5m |
Wheels On Rear Axle | One On Each Side |
Electronic Sensor | MOBA,Germany |
Operator Seat | Double |
Work Applicability | Bituminous Material,Bituminous,Wet Mix,GSB,DLC,DBM Material (Dual Purpose) |
Working Speed | 1.27 to 24 m/min (Max.) |
Travelling Speed | 16 km/hr (Max) |
Fuel | 75 L (16.5 gal) |
Engine Oil | 11 L (2.4 gal) |
Wheel Paver Finisher
Brand/Make | Uniter |
Operating height | 3.56 m |
Wheel Base | 2.62 m |
Hopper Capacity | 4.25 m3 (151 ft3) |
Material Laying Capacity | 125 TPH |
Engine Power | 76 hp @ 2300 rpm |
Screed Size | 2.5m to 4.5m |
Conveyor | Hydraulic |
Working Speed | 1.27 to 24 m/min (Max.) |
Travelling Speed | 16 km/hr (Max) |
Fuel | 75 L (16.5 gal) |
Engine Oil | 11 L (2.4 gal) |
Auger Screw Diameter | 250 mm |
Hopper Working Width | 3.220 m |
Hopper Closed Width | 2.440 m |
Feed Tunnel Width | 1.276 m |
Dump Height | 0.70 m |
Thrust Roller Height | 0.57 m |
Wheel Mounted Paver Finisher
Operating height | 3.47 m |
Hopper Capacity | 4.25 m3 (151 ft3) |
Material Laying Capacity | 150 TPH |
Engine Power | 76 hp |
Screed Size | 2.5m to 5.0m |
Conveyor | Hydraulic |
Electrical System | 12 V DC |
Laying Thickness | 200 mm (Max) to 10 mm (Min) |
Working Speed | 1.27 to 30 m/min (Max.) |
Travelling Speed | 16 km/hr (Max) |
Screed width | 2.5 m |
Fuel | 105 L (23.2 gal) |
Hopper Working Width | 3.220 m |
Hopper Closed Width | 2.440 m |
Dump Height | 0.70 m |
We are offering Wheel Mounted Paver Finisher to our client.
Features:
Kirloskar make water-cooled electric start Diesel Engine Model 4R 1040T (76 hp @ 2200 rpm) or equivalent
Engine has sufficient space on all the sides for air draft and cooling of engine
Engine is easily accessible for daily maintenance like checking engine oil, coolant water level, engine suction filter etc.
Engine starter, alternator can be easily removed for periodic maintenance.
Gauges like engine temperature, oil pressure and ampere meter are on sliding panel and are easily visible from operator’s seat.